UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

FORM 10-Q

 

 (Mark One)

 

/X/ QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE
ACT OF 1934

 

FOR THE QUARTERLY PERIOD ENDED DECEMBER 31, 2016.

 

OR

 

/ / TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT
OF 1934

 

FOR THE TRANSITION FROM _______ TO ________.

 

COMMISSION FILE NUMBER 0-28353

 

INTEGRAL TECHNOLOGIES, INC.

 


 

(Exact Name of Registrant as Specified in its Charter)

 

Nevada

98-0163519

(State or other jurisdiction of

(I.R.S. Employer

incorporation or organization)

Identification No.)

 

2605 Eastside Park Road Suite 1, Evansville, Indiana 47715

 (Address of principal executive offices) (Zip Code)

 

Issuer's telephone number: (812) 550-1770

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes No ☐

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes No ☐

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 Large accelerated filer ☐

Accelerated filer

 

 

Non-accelerated filer

Smaller reporting company ☒

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [ ] No [X]

 

State the number of shares outstanding of each of the issuer's classes of common equity, as of the latest practicable date: As of February 10, 2017, there were 140,402,603 outstanding shares of the Registrant's Common Stock, $0.001 par value.

 

 

 

 

INTEGRAL TECHNOLOGIES, INC.

DECEMBER 31, 2016 QUARTERLY REPORT ON FORM 10-Q

 

TABLE OF CONTENTS

 

 

Page

PART I - FINANCIAL INFORMATION

 

 

 

 

 

Item 1. Financial Statements    
     

Consolidated Balance Sheets

F-1  
     
Consolidated Statements of Operations F-2  
     
Consolidated Statements of Cash Flows F-3  
     
Notes to Consolidated Financial Statements F-4  
     

Item 2. Management’s Discussion and Analysis and Results of Operations

 

1

Item 3. Quantitative and Qualitative Disclosure About Market Risk

 

5

Item 4. Controls and Procedures

 

5

 

   

PART II - OTHER INFORMATION

   

 

   

Item 1. Legal Proceedings

 

7

Item 1A. Risk Factors

 

7

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

 

7

Item 3. Defaults Upon Senior Securities

 

7

Item 4. Mine Safety Disclosures

 

7

Item 5. Other Information

 

7

 Item 6. Exhibits

 

9

SIGNATURES

 

10

 


 

 

PART I
FINANCIAL INFORMATION

 

ITEM 1. FINANCIAL STATEMENTS

 

Integral Technologies, Inc.

Consolidated Balance Sheets

As of December 31, 2016, (Unaudited) and June 30, 2016 (Audited)

 

 

      December 31, 2016       June 30, 2016  
ASSETS                

Current assets:

               

Cash

  $ 43,615     $ 47,350  

Accounts receivable

    33,154       21,894  

Prepaid expense

    63,762       90,329  
                 

Total current assets

    140,531       159,573  
                 

Deposit

    2,500       2,500  

Property and equipment, net

    75,957       74,689  
                 

Total Assets

  $ 218,988     $ 236,762  
                 

LIABILITIES AND STOCKHOLDERS' DEFICIT

               

Current liabilities:

               

Accounts payable and accrued expenses

  $ 1,687,690     $ 1,004,550  

Related party payable

    127,500       30,000  

Loans payable

    98,560       148,022  

Deferred revenue

    50,000       50,000  

Convertible debentures

    686,408       664,621  

Derivative liabilities

    44,000       142,797  

Warrant liability

    49,200       87,500  
                 

Total current liabilities

    2,743,358       2,127,490  
                 

Non-current liabilities:

               

Deferred revenue, net of current portion

    295,833       320,833  
                 

Total Liabilities

    3,039,191       2,448,323  
                 

Commitments and Contingencies

               
                 

Stockholders' Deficit

               

Preferred stock and paid-in capital in excess of  $0.001 par value, 20,000,000 shares authorized, 0 (June 30, 2016 - 0) issued and outstanding

    -       -  

Common stock and paid in capital in excess of  $0.001 par value, 150,000,000 shares authorized, 140,402,603 (June 30, 2016 - 133,506,044) issued and outstanding

    55,768,860       55,024,270  

Share subscriptions and obligations to issue shares

    448,904       340,184  

Accumulated other comprehensive income

    46,267       46,267  

Accumulated deficit

    (59,084,234 )     (57,622,282 )
                 

Total stockholders' deficit

    (2,820,203 )     (2,211,561 )
                 

Total Liabilities and Stockholders' Deficit

  $ 218,988     $ 236,762  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

F-1

 

 

Integral Technologies, Inc.

Consolidated Statements of Operations

For the three and six months ended December 31, 2016 and 2015 (unaudited)

 

   

Three Months Ended December 31,

   

Six Months Ended December 31,

 
   

2016

   

2015

   

2016

   

2015

 
                                 

Revenue

  $ 27,841     $ 29,743     $ 51,086     $ 42,443  
                                 

Operating expenses:

                               

Selling, general, and administrative expenses

    543,316       714,255       1,199,745       1,510,708  

Research and development

    121,075       162,252       250,914       345,249  
                                 

Total operating expenses

    664,391       876,507       1,450,659       1,855,957  
                                 

Fair value gain (loss) on derivative financial liabilities

    4,900       17,351       34,138       (39,499 )

Fair value gain on warrant liability

    5,500       -       38,300       -  

(Loss) gain on extinguishment of convertible debenture

    (33,906 )     -       (33,906 )     1,927  

Other income

    97       157       109       183  

Interest expense

    (71,218 )     (164,159 )     (101,020 )     (224,897 )
                                 

Net Loss

  $ (731,177 )   $ (993,415 )   $ (1,461,952 )   $ (2,075,800 )
                                 

Net loss per share basic and diluted

  $ (0.01 )   $ (0.01 )   $ (0.01 )   $ (0.02 )
                                 

Weighted average number of common shares outstanding

    137,839,288       117,022,424       136,591,909       115,613,819  

 

 

The accompanying notes are integral part of the consolidated financial statements.

 

F-2

 

 

Integral Technologies, Inc.

Consolidated Statements of Cash Flows

For the six months ended December 31, 2016 and 2015 (unaudited)

 

   

Six Months Ended December 31,

 
   

2016

   

2015

 

Cash flows from operating activities:

               

Net loss

  $ (1,461,952 )   $ (2,075,800 )

Items not involving cash

               

Depreciation

    2,232       2,291  

Amortization of debt issuance costs

    61,060       -  

Deferred revenues

    (25,000 )     (25,000 )

Fair value gain on warrant liability

    (38,300 )     -  

Fair value (gain) loss on derivative financial liabilities

    (34,138 )     39,499  

Interest on convertible debentures

    37,167       204,304  

Loss (gain) on extinguishment of convertible debentures

    33,906       (1,927 )

Obligation to issue shares for consulting services

    12,720       18,060  

Stock-based compensation

    89,790       89,792  

Settlement of debt

    -       6,220  

Changes in working capital

    795,947       278,693  

Net cash used in operating activities:

    (526,568 )     (1,463,868 )
                 

Cash flows from investing activities:

               

Purchase of property and equipment

    (3,500 )     (13,756 )

Net cash used in investing activities:

    (3,500 )     (13,756 )
                 

Cash flows from financing activities:

               

Proceeds from loans

    92,000       -  

Repayment of loans

    (110,022 )     (32,335 )

Proceeds from issuance of common stock

    530,355       28,000  

Proceeds from warrants exercised

    -       882,271  

Subscriptions received

    14,000       -  

Proceeds from convertible debentures

    -       763,950  

Net cash provided Financing activities:

    526,333       1,641,886  
                 

(Decrease) increase in cash

    (3,735 )     164,262  

Cash, beginning of year

    47,350       117,307  

Cash, end of year

  $ 43,615     $ 281,569  
                 
                 

Supplemental cash flow information:

               

Interest paid

  $ 2,793     $ 13,110  

 

 

The accompanying notes are integral part of the consolidated financial statements.

 

F-3

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 1 - NATURE OF OPERATIONS

 

Integral Technologies, Inc. (the “Company” or “Integral”) was incorporated under the laws of the state of Nevada on February 12, 1996 and has recently relocated its head office to Evansville, Indiana, USA. The Company is in the business of researching, developing and commercializing new electrically-conductive resin-based materials called ElectriPlast.

 

The Company will be devoting all of its resources to the research, development and commercialization of its ElectriPlast technology.

 

NOTE 2 - SIGNIFICANT ACCOUNTING POLICIES

 

These consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States (“US GAAP”) and are presented in United States dollars. We have prepared the consolidated financial statements included herein, without audit, pursuant to the rules and regulations of the United States Securities and Exchange Commission (“SEC”). The consolidated financial statements include the Company’s wholly owned subsidiaries. Certain information and footnote disclosures normally included in the annual financial statements prepared in accordance with U.S. generally accepted accounting principles (“GAAP”) have been condensed from the accompanying consolidated financial statements. The accompanying comparative year end consolidated balance sheet was derived from the audited financial statements included in the annual financial statements. The accompanying interim financial statements are unaudited, and reflect all adjustments which are in the opinion of management, necessary for a fair statement of the Company’s consolidated financial position, results of operations, and cash flows for the periods presented. Unless otherwise noted, all such adjustments are of a normal, recurring nature. All intercompany transactions and balances have been eliminated in consolidation. The Company’s results of operations and cash flows for the interim periods are not necessarily indicative of the results of operations and cash flows that it may achieve in future periods. Nevertheless, we believe that the disclosures are adequate to ensure the information presented is not misleading. These unaudited consolidated financial statements should be read in conjunction with our audited financial statements and the notes thereto for the year ended June 30, 2016 included in the Company’s 10-K filed with the SEC on January 17, 2017.

 

Principles of consolidation

 

These consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries, Integral Operating, LLC (“Operating”), Integral Vision Systems, Inc. ("IVSI"), Integral Systems Corporation (formerly Antek Wireless Inc.), Electriplast Corp. (formerly Plastenna, Inc.) (“Electriplast”), Integral Technologies Asia, Inc. (“Asia”) and its 76.625%-owned subsidiary, Emergent Technologies Corp. ("ETC"), which is currently inactive. ETC's non-controlling interest balance is immaterial to the financial statements. All intercompany balances and transactions have been eliminated.

 

Basic and diluted net loss per share

 

Basic net loss per common share is computed by dividing the net loss attributable to common stockholders by the weighted-average number of common shares outstanding during the year. Diluted net loss per common share is computed by dividing the net loss by the weighted-average number of common shares and dilutive common share equivalents outstanding during the period. Because the Company has reported a net loss for all years presented, diluted net loss per common share is the same as basic net loss per common share for those years.

 

F-4

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

 

NOTE 2 - SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

 

Stock issued in exchange for services

 

The valuation of common stock issued in exchange for services to non-employees is valued at an estimated fair market value of the Company’s stock price based upon trading, sales and other issuances of the Company's common stock. Stock-based compensation expense related to awards to non-employees is recognized based on the then-current fair value at each measurement date over the associated service period of the award, which is generally the vesting term, using the accelerated attribution method. The fair value of non-employee stock options is estimated using the Black-Scholes valuation model with assumptions generally consistent with those used for employee stock options, with the exception of the expected term, which is the remaining contractual life at each measurement date. Restricted shares are issued or become issuable when they vested and are measured at their grant date and recorded evenly over the vesting period.

 

Revenue recognition

 

The Company has not generated significant revenue since inception. Although the Company has begun to receive revenue from the sale of material for commercial applications and a services contract, the Company continues to devote substantially all its efforts to developing the business.

 

The Company recognizes revenues from a contract with a plastics technology company for which it provides services and products, on a net basis. Fees are recognized monthly as services and products are provided. This is the point that revenues are considered realizable and earned.

 

As discussed in Note 14, the Company signed a ten-year license agreement with Hanwha Advanced Materials Co., Ltd., (“Hanwa”), of South Korea. For license agreements that the Company enters into, revenue is recognized when all four of the following criteria are met: (i) a contract is executed, (ii) the contract price is fixed and determinable, (iii) delivery of the service or products has occurred, and (iv) collectability of the contract amounts is reasonably assured.

 

The Company’s license agreements can provide for upfront license fees, maintenance payments, and/or substantive milestone payments. In accordance with revenue recognition guidance, the Company identifies all of the deliverables at the inception of the agreement. License fees which are nonrefundable fees will be evaluated for standalone value to the licensor and may be recognized upon delivery pursuant to terms of the agreement. Upfront nonrefundable fees associated with license and development agreements where the Company has continuing involvement that does not meet the requirement of a separate deliverable are recorded as deferred revenue and recognized over the estimated service period. The Company may also enter into agreements to provide engineering services. The Company recognizes revenue from engineering services as the service has been performed and amounts are reasonably assured of collection.

 

Foreign currency translation

 

The Company’s functional and reporting currency is the US dollar. Transactions and balances for the Company’s operations that are not in US dollars are translated into US dollars at the exchange rates in effect at the balance sheet dates for monetary assets and liabilities, and at historical exchange rates for non-monetary assets and liabilities. Revenues and expenses are translated at the rate of exchange on the date of the transaction, except for amortization and depreciation, which are translated on the same basis as the related assets. Resulting translation gains or losses are included in the consolidated statements of operations. The foreign currency impact on the consolidated financial statements is immaterial.

 

Advertising

 

Advertising costs are charged to operations when incurred. Advertising expense was $4,837 and $31,083 for the six months ended December 31, 2016 and 2015, respectively. Advertising expense was $901 and $14,166 for the three months ended December 31, 2016 and 2015, respectively.

F-5

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 2 - SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

 

Research and development

 

The Company expenses all research and development expenditures as incurred.

 

Use of estimates

 

The preparation of financial statements in conformity with US GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Significant areas requiring the use of management estimates include valuation allowance for deferred income tax assets, the determination of the assumptions used in calculating the fair value of stock-based compensation and the determination of the assumptions used in calculating the fair value of derivative financial liabilities and the warrant liability. Actual results could differ from those estimates and could impact future results of operations and cash flows.

 

Financial instruments

 

We have issued financial instruments that contain embedded conversion features that qualify as derivatives and are therefore accounted for as liabilities. The derivative liabilities are initially recorded at fair value, with gains and losses arising from changes in fair value recognized in the consolidated statements of operations at each period end while such instruments are outstanding. The derivative liabilities relating to the convertible debt is valued using a binomial lattice model and the Black-Scholes Model where appropriate. The fair value of the warrants issued with reset provisions are measured using the Monte Carlo method.

 

Fair value measurements

 

Assets and liabilities recorded at fair value in the balance sheets are categorized based upon the level of judgment associated with the inputs used to measure their fair value. For certain of the Company’s financial instruments including cash and accounts payable, the carrying values approximate fair value due to their short-term nature.

 

ASC 820 Fair Value Measurements and Disclosures specifies a hierarchy of valuation techniques based on whether the inputs to those valuation techniques are observable or unobservable. In accordance with ASC 820, these inputs are summarized in the three broad levels listed below:

 

 

Level 1 – Quoted prices in active markets for identical securities;

 

Level 2 – Other significant observable inputs that are observable through corroboration with market data (including quoted prices in active markets for similar securities); and

 

Level 3 – Significant unobservable inputs that reflect management’s best estimate of what market participants would use in pricing the asset or liability.

 

The fair value measurement of the derivative liability and warrants with reset provisions are classified as a Level 3 measurement as further discussed under Fair Value Measurements.

 

F-6

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 2 - SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

 

Income taxes

 

The Company uses the asset and liability approach in its method of accounting for income taxes that requires the recognition of deferred tax liabilities and assets for expected future tax consequences of temporary differences between the carrying amounts and the tax basis of assets and liabilities. A valuation allowance against deferred tax assets is recorded if, based upon weighted available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized.

 

The impact of an uncertain tax position that is more likely than not of being sustained upon audit by the relevant taxing authority is recognized at the largest amount that is more likely than not to be sustained. No portion of an uncertain tax position will be recognized if the position has less than a 50% likelihood of being sustained.

 

Stock-based compensation

 

The Company accounts for stock-based compensation expense associated with stock options and other forms of equity compensation by estimating the fair value of share-based payment awards on the date of grant using the market price of common stock or the Black-Scholes option pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as an expense over the requisite service periods in the Company’s consolidated statements of operations. The Company uses the straight-line single-option method to recognize the value of stock-based compensation expense for all share-based payment awards. Stock-based compensation expense recognized in the consolidated statements of operations is reduced for estimated forfeitures, as it is based on awards ultimately expected to vest. Forfeitures are estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates.

 

Property and Equipment

 

Property and equipment are recorded at cost and depreciated over the estimated useful lives using the straight-line method of depreciation. Amortization of the leasehold improvements is computed using the straight-line method over the lesser of the estimated useful lives of the underlying assets and the term of the related lease.

 

Reclassifications:

 

For comparability, certain 2016 fiscal year amounts have been reclassified to conform to classifications adopted in the 2017 fiscal year. These reclassifications did not have an impact on stockholders’ deficit or net loss on the 2016 fiscal year consolidated financial statements.

 

Recent Accounting Pronouncements not yet adopted

 

In May 2014, the FASB issued amended revenue recognition guidance to clarify the principles for recognizing revenue from contracts with customers. The guidance requires an entity to recognize revenue to depict the transfer of goods or services to customers in an amount that reflects the consideration to which an entity expects to be entitled in exchange for those goods or services. The guidance also requires expanded disclosures relating to the nature, amount, timing, and uncertainty of revenue and cash flows arising from contracts with customers. Additionally, qualitative and quantitative disclosures are required about customer contracts, significant judgments and changes in judgments, and assets recognized from the costs to obtain or fulfill a contract. The requirements are effective for annual reporting periods beginning after December 15, 2017. Early adoption is not permitted. We are evaluating the impact of the amended revenue recognition guidance on our financial statements.

 

F-7

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 2 - SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

 

Recent Accounting Pronouncements not yet adopted (Continued)

 

In August 2014, the FASB issued ASU 2014-15, Disclosure of Uncertainties About an Entity’s Ability to Continue as a Going Concern (“ASU 2014-15”).  ASU 2014-15 provides guidance on determining when and how to disclose going-concern uncertainties in the financial statements.  The new standard requires management to perform interim and annual assessments of an entity’s ability to continue as a going concern within one year of the date the financial statements are issued.  An entity must provide certain disclosure if conditions or events raise substantial doubt about the entity’s ability to continue as a going concern.”  ASU 2014-15 applies to all entities and is effective for annual period ending after December 15, 2016, and interim periods thereafter, with early adoption permitted.  The adoption of this standard is not expected to have a material impact on the Company’s financial position, results of operations or cash flows.

 

In March 2016, the FASB issued ASU 2016-09, Compensation – Stock Compensation:  Improvements to Employee Share-Based Payment Accounting, which relates to the accounting for employee share-based payments.  This standard addresses several aspects of the accounting for share-based payment award transactions, including: (a) income tax consequences; (b) classification of awards as either equity or liabilities; and (c) classification on the statement of cash flows.  This standard will be effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years.  The Company is currently evaluating the impact the adoption of this ASU will have on our financial statements.

 

In February 2016, FASB issued ASU 2016-2, Leases, under which lessees will recognize most leases on the balance sheet. This will generally increase reported assets and liabilities. For public entities, this ASU is effective for annual and interim periods in fiscal years beginning after December 15, 2018. ASU 2016-2 mandates a modified retrospective transition method for all entities. We are in the process of determining the impact that the updated accounting guidance will have on our financial statements.

 

Recent accounting pronouncements adopted

 

In April 2015, the FASB issued Update No. 2015-03 – Interest – Imputation of Interest (Subtopic 835-30): Simplifying the Presentation of Debt issuance costs. To simplify presentation of debt issuance costs, the amendments in this Update require that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. For public business entities, the amendments in this Update are effective for financial statements issued for fiscal years beginning after December 15, 2015, and interim periods within those fiscal years. The adoption of this standard did not have a material impact on the Company’s financial position, results of operations or cash flows.

 

NOTE 3 - GOING CONCERN

 

These consolidated financial statements have been prepared on a going concern basis, which assumes the Company will continue in operation for the foreseeable future and will be able to realize its assets and discharge its liabilities in the ordinary course of business. The Company’s operations have resulted in a net loss of $1,461,952 for the six months ended December 31, 2016 (2015 - $2,075,800), and an accumulated deficit as of December 31, 2016, $59,084,234 (June 30, 2016 - $57,622,282) and a working capital deficiency of $2,602,827 as of December 31, 2016, (June 30, 2016 - $1,967,917). The Company does not have sufficient revenue-producing activities to fund its expenditure requirements to continue to advance researching, developing and commercializing its conductive plastics technology, ElectriPlast. Subsequent to period end, the Company raised $9,800 pursuant to private placements (note 12). The Company estimates that, without further funding, it will deplete its cash resources within three months. These factors raise substantial doubt about the Company’s ability to continue as a going concern.

 

F-8

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 3 - GOING CONCERN (CONTINUED)

 

These consolidated financial statements do not reflect adjustments that would be necessary if the going concern assumption were not appropriate because management believes that the actions already taken or planned will mitigate the adverse conditions and events that raise doubts about the validity of the going concern assumption used in preparing these consolidated financial statements. Management intends to raise additional capital through stock and debt issuances to finance operations. If none of these events occur, there is a risk that the business will fail.

 

NOTE 4 - STOCKHOLDERS’ DEFICIT

 

Common stock

 

During the six months ended December 31, 2016, the Company completed the following private placements:

 

 

(i)

On July 27, 2016, the Company raised $226,355 for the issuance of 1,968,304 units. Each unit consisted of one common share at $0.115 per share and one quarter share purchase warrant at $0.001 per warrant to purchase 492,076 common shares on or before April 30, 2017 at an exercise price of $0.30 per warrant.

 

 

(ii)

On August 22, 2016, the Company raised $94,000 for the issuance of 817,391 units. Each unit consisted of one common share at $0.115 per share and one quarter share purchase warrant at $0.001 per warrant to purchase 204,348 common shares on or before May 31, 2017 at an exercise price of $0.30 per warrant.

 

 

(iii)

During December, 2016, the Company completed private placements amounting to $210,000 for the issuance of 3,000,000 units. Each unit consisted of one common share at $0.07 per share and one quarter share purchase warrant at $0.001 per warrant to purchase 750,000 common shares on or before October 1, 2017 at an exercise price of $0.20 per warrant.

 

Pursuant to a promissory note agreement, 75,000 common shares were issued on October 24, 2016 (note 10(d)).

 

During the six months ended December 31, 2016, the Company issued shares of common stock pursuant to debt agreements:

 

 

(i)

On September 21, 2016, the Company issued 1,035,864 shares to settle the remaining balance of $69,649, the first convertible debt note with JMJ Financial (note 9).

 

 

(ii)

On October 11, 2016, the Company issued 75,000 shares pursuant to a debt agreement, measured at a fair value of the Company’s common shares on that date of $10,500, recorded as interest expense (note 10).

 

During the year ended June 30, 2016, the Company completed the following private placement:

 

 

(i)

Completed a private placement amounting to $28,000 for the issuance of 56,000 shares of common stock at $0.50 per share.

 

Preferred stock

 

As of December 31, 2016, and June 30, 2016 there are no outstanding preferred shares of stock.

 

F-9

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 4 - STOCKHOLDERS’ DEFICIT (CONTINUED)

 

Stock-based compensation

 

During the six months ended December 31, 2016, the Company recorded stock-based compensation expense with respect to vesting stock options, restricted stock and warrants and modified stock options of $89,790 (2015 - $89,792). During the three months ended December 31, 2016, the Company recorded stock-based compensation expense with respect to vesting restricted stock of $44,894 (2015 - $44,896), respectively. Stock-based compensation expense is included in selling, general, and administrative expenses.

Stock-based compensation not yet recognized at December 31, 2016 relating to non-vested stock options was $106,785 (June 30, 2016 - $196,575), which will be recognized over a period of 1 year (2016 – 1 year).

 

Stock options and restricted shares

 

The Company is reviewing several alternatives to replace its 2001, 2003, and 2009 Stock Option Plans with a new omnibus stock option plan (the “New Plan”).   In certain cases, we have made contractual commitments to provide shares or stock option grants in anticipation of putting in place the New Plan.  The New Plan will allow us to attract and retain key employees or service providers as we continue to develop our business.  We will obtain the necessary approvals based on the attributes of the plan.  We anticipate that this New Plan will be implemented prior to June 30, 2017.

 

In January 2001, the Company adopted the Integral Technologies, Inc. 2001 Stock Plan (the "2001 Plan"), a non-qualified stock option plan under which the Company may issue up to 2,500,000 stock options and bonuses of common stock of the Company to provide incentives to officers, directors, key employees and other persons who contribute to the success of the Company. This plan was amended during December 2001 to increase the number of common stock options that may be granted from 2,500,000 to 3,500,000 stock options. As of December 31, 2016, there were no (June 30, 2016 - nil) common stock options available under this plan.

 

In April 2003, the Company adopted the Integral Technologies, Inc. 2003 Stock Plan (the "2003 Plan"), a non-qualified stock option plan under which the Company may issue up to 1,500,000 stock options. As of December 31, 2016, there were no (June 30, 2016 - nil) common stock options available under this plan.

 

During the fiscal year ended June 30, 2010, the Company adopted the Integral Technologies, Inc. 2009 Stock Plan (the "2009 Plan"), a non-qualified stock option plan under which the Company may issue up to 4,000,000 common stock options. As of December 31, 2016, there were no (June 30, 2016 - nil) common stock options available under this plan.

 

F-10

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 4 - STOCKHOLDERS’ DEFICIT (CONTINUED)

 

Stock option activity

 

The following summarizes information about the Company’s options outstanding:

 

 

Number of Options

 

Price Per Option

 

Weighted Average Exercise Price

Outstanding, June 30, 2016

1,150,000

 

$ 0.25

to $ 0.85  

$ 0.37

Granted

-

 

 

-

   

-

Cancelled

(150,000)

    $ 0.50    

$ 0.50

Expired

(100,000)

    $ 0.85    

-

 

-

           

Outstanding, December 31, 2016

900,000

 

$ 0.25

to $ 0.31  

$ 0.30

Exercisable, December 31, 2016

850,000

 

$ 0.25

to $ 0.31  

$ 0.30

 

A summary of the status of non-vested options as of December 31, 2016, is as follows:

 

   

Number of Options

 

Weighted Average Grant Date Fair Value

         

Non-vested at June 30, 2016

50,000

 

$ 0.25

 

Options granted

-

 

-

 

Options forfeited

-

 

-

 

Options vested

-

 

-

         

Non-vested at December 31, 2016

50,000

 

$ 0.25

 

The weighted average remaining contractual lives for options outstanding and exercisable at December 31, 2016 are 0.79 years and 0.54 years (June 30, 2016 - 1.13 and 0.93 years), respectively.

 

The following summarizes the options outstanding and exercisable:

 

         

Number of Options

Expiry Date

   

Exercise Price

 

December 31, 2016 

 

June 30, 2016 

December 1, 2016

 

$0.85

 

-

 

100,000

December 1, 2016

 

$0.50

 

-

 

75,000

February 19, 2017

 

$0.31

 

750,000

 

750,000

June 1, 2017

   

$0.50

 

-

 

75,000

January 13, 2019

 

$0.25

 

50,000

 

50,000

January 13, 2020

 

$0.25

 

50,000

 

50,000

January 13, 2021

 

$0.25

 

50,000

 

50,000

Total outstanding

     

900,000

 

1,150,000

Total exercisable

     

850,000

 

1,100,000

 

 

F-11

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 4 - STOCKHOLDERS’ DEFICIT (CONTINUED)

 

Stock option activity (continued)

 

The aggregate intrinsic value of options outstanding and exercisable as of December 31, 2016 was $nil and $nil (June 30, 2016 - $nil and $nil), respectively. The aggregate intrinsic values exclude options having a negative aggregate intrinsic value due to awards with exercise prices greater than market value. The intrinsic value is the difference between the market value of the shares and the exercise price of the award.

 

During the year ended June 30, 2014, the Company entered into employment agreements, whereby the employees would be granted restricted shares. The holder of a restricted share award is generally entitled at all times on and after the date of the agreement to exercise the rights of a shareholder of the Company, including the right to vote and the right to receive dividends on the shares. These shareholders do not have the ability to sell, transfer or otherwise encumber the restricted shares awards until they fully vest. The restricted shares granted vest over three or four-year periods and the grant date fair value of the awards is recognized as expense over the vesting period.

 

During the six months ended December 31, 2016, the Company issued nil shares (year ended June 30, 2016 - 377,500) and is obligated to issue an additional 937,500 shares pursuant to the employment agreements.

 

A summary of the status of non-vested restricted shares as of December 31, 2016, is as follows:

 

   

Number of

Restricted Stock

Awards

   

Weighted Average

Grant Date Fair

Value

 
                 

Non-vested at June 30, 2016

    337,500     $ 0.38  

Awards granted

    -       -  

Awards forfeited

    -       -  

Awards vested

    (337,500 )   $ 0.38  
                 

Non-vested at December 31, 2016

    -     $ -  

 

F-12

 

 

 Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 4 - STOCKHOLDERS’ DEFICIT (CONTINUED)

 

Stock purchase warrants

 

The following summarizes information about the Company’s stock purchase warrants outstanding:

 

     

Number of Warrants

 

Price Per Share

 

Weighted Average Exercise Price

                   

Balance, June 30, 2016 

 

12,506,309

 

$0.08

- $0.50  

$0.32

 Granted

   

1,446,424

 

$0.20

- $0.30  

$0.25

 Expired

   

(8,046,844)

 

$0.30

- $0.50  

$0.37

                   

Balance, December 31, 2016

 

5,905,889

 

$0.08

- $0.30  

$0.24

 

 

         

Number of Warrants

Expiry Date

   

Exercise Price

 

December 31, 2016

 

June 30, 2016 

               

November 25, 2016

 

$0.30

 

-

 

8,501,786

November 25, 2016

 

$0.50

 

-

 

2,754,523

April 30, 2017

 

$0.30

 

492,076

 

-

May 31, 2017

 

$0.30

 

204,348

 

-

October 31, 2017*

 

$0.30

 

3,209,465

 

-

October 31, 2017

 

$0.20

 

750,000

 

-

May 5, 2020

 

$0.08

 

1,250,000

 

1,250,000

Total outstanding and exercisable

     

5,905,889

 

12,506,309

 

* During the six months ended December 31, 2016, 3,209,465 warrants expiring November 25, 2016 were extended to October 31, 2017.

 

Share obligations

 

Pursuant to a consulting agreement with the CFO dated August 19, 2013, the Company is obligated to pay $5,000 to $12,500 per month based on the number of hours worked and to issue 6,000 shares of common stock per month beginning September 1, 2013.

 

As of December 31, 2016, no shares have been issued. As such, a total of 240,000 shares of common stock are issuable. The obligation to issue shares of common stock was measured at a weighted average fair value of $0.38 per share on the date each series of shares became issuable. During the six months ended December 31, 2016, $4,320 (2015 - $18,060) was recorded as an obligation to issue shares. During the three months ended December 31, 2016, $2,040 (2015 - $8,340) was recorded as an obligation to issue shares. As of December 31, 2016, a total balance of $91,260 (June 30, 2016 - $86,940) remains as an obligation to issue the shares within equity, as this obligation can only be satisfied in shares of common stock.

 

Pursuant to a separation agreement with the previous CFO, the Company will issue 36,000 shares of common stock and settle all unpaid fees from July 1, 2016 to February 10, 2017 (effective date of resignation). The Company is currently in the process of negotiating a compensation settlement agreement.

 

F-13

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 4 - STOCKHOLDERS’ DEFICIT, CONTINUED

 

Share obligations (continued)

 

Pursuant to director’s agreements, the Company is obligated to issue 65,000 shares of common stock. As at December 31, 2016, these shares have not been issued and as such, the grant date fair value of $29,250 has been recognized in obligation to issue shares within equity.

 

Pursuant to amended debt agreements, the Company is obligated to issue 725,000 shares of common stock (note 10). As at December 31, 2016, these shares have not been issued and as such, the grant date fair value of $82,000 has been recognized in obligation to issue shares within equity.

 

NOTE 5 - INCOME TAXES

 

There are no current or deferred tax expenses for the six months ended December 31, 2016, due to the Company's loss position. The Company has fully reserved for any benefits of these losses. The deferred tax consequences of temporary differences in reporting items for financial statement and income tax purposes are recognized as appropriate. Realization of the future tax benefits related to the deferred tax assets is dependent on many factors, including the Company's ability to generate taxable income within the net operating loss carry-forward period. Management has considered these factors in reaching its conclusion to provide a full valuation allowance for financial reporting purposes.  As of December 31, 2016, the Company had a net operating loss carry-forward of $43,927,000.


NOTE 6 - SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION

   

Six Months Ended

December 31, 2016

   

Six Months Ended

December 31, 2015

 

Changes in working capital

               

Prepaid expenses

  $ 26,567     $ 22,716  

Accounts receivable

    (11,260 )     (5,420 )

Accounts payable and accruals

    683,140       261,397  

Related party payable

    97,500       -  
    $ 795,947     $ 278,693  
                 

Shares issued for:

               

Subscriptions received in prior year

  $ -     $ 114,000  

Settlement of debt

    -       6,220  

Pursuant to debt agreements

    10,500       -  

Settlement of convertible debenture

    113,945       222,141  

 

NOTE 7 - RELATED PARTY TRANSACTIONS

 

As of December 31, 2016, $127,500 (June 30, 2016 - $30,000) was owed to the Company's executives for outstanding managements fees, consulting fees and business related reimbursements, and are without interest or stated terms of repayment.

 

NOTE 8 - SEGMENT INFORMATION

 

The Company operates primarily in one business segment, the development of electronically-conductive resin-based materials, with operations located in the US.

 

F-14

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 9 - CONVERTIBLE DEBENTURES

 

During the six months ended December 31, 2016, $69,649 (three months ended December 31, 2016 - $nil) of the face value of debentures were extinguished by issuing 1,035,000 shares of common stock of the Company. As a result, $113,945 representing the market value of the shares issued was included in additional paid in capital and a loss on extinguishment of $33,906. The loss represents the difference between fair value of the derivative liabilities and the amortized cost of convertible debentures of $80,039 and the market value of the shares.

 

As of December 31, 2016, the total amortized value of the outstanding convertible debentures were $686,408 (June 30, 2016 - $664,621), the total fair value of the outstanding derivative liabilities were $44,000 (June 30, 2016 - $142,797) and the fair value of the warrant liability was $49,200 (June 30, 2016 - $87,500).

 

During the six months ended December 31, 2016, a fair value gain on the derivative liability of $34,138 (2015 fair value loss - $56,850) was recognized. During the three months ended December 31, 2016, a fair value gain on the derivative liability of $4,900 (2015 fair value loss - $56,850) was recognized. As of December 31, 2016, $34,179 of the fair value gain relates to the conversion features associated with the outstanding debentures with the remaining fair value loss of $41 relating to the conversion feature associated with the debenture that was settled and extinguished.

 

As of December 31, 2016, 10,822,723 (June 30, 2016 – 1,374,041) common shares of the Company would be required to settle the remaining tranches of convertible debt at a weighted average conversion price of $0.065 (June 30, 2016 - $0.11) per common share.

 

As of December 31, 2016, the face value of convertible debentures is $703,477 (June 30, 2016 - $1,189,649), which includes accrued interest of $120,000 (June 30, 2016 - $146,087).

 

During the six months ended December 31, 2016, debt discount amortization of $37,167 (2015 - $204,304) was recorded as interest expense. During the three months ended December 31, 2016, debt discount amortization of $12,562 (2015 - $152,664) was recorded as interest expense.

 

The fair value of the derivative financial liability is calculated using a binomial lattice valuation method at inception and the balance sheet date. The fair value of the warrant liability is calculated using the Monte Carlo Model at inception and the balance sheet date.

 

The following assumptions were used in determining the fair value of the derivative liabilities at inception during the six months ended:

 

 

December 31, 2016

Share price

 0.16 0.50

Conversion price

 0.11  - 0.37

Expected life (years)

 0.78  - 2.00

Interest rate

 0.42  - 0.63%

Volatility

 76.39  - 101.5%

Dividend yield

  N/A

 

Estimated forfeitures

  N/A  

 

F-15

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 9 - CONVERTIBLE DEBENTURES (CONTINUED)

 

The following assumptions were used in determining the fair value of the derivative financial liabilities as of:

 

   

December 31, 2016

  June 30, 2016

Share price

 

0.09

    0.16  

Conversion price

 

0.06

    0.11  

Expected life (years)

 

0.34

  0.850 -

1.25

Interest rate

 

0.50%

  0.45 -

0.50%

Volatility

 

91.50%

  91.50 -

122.29%

Dividend yield

 

N/A

    N/A  

Estimated forfeitures

 

N/A

    N/A  

 

The following assumptions were used in determining the fair value of the derivative warrant liability as of:

 

 

December 31, 2016

 

June 30, 2016

Share price

0.09

 

0.16

Conversion price

0.06

 

$0.09

Expected life (years)

1.34

 

1.85

Interest rate

0.58%

 

0.58%

Volatility

92%

 

92%

Dividend yield

N/A

 

N/A

Estimated forfeitures

N/A

 

N/A

 

 

NOTE 10LOANS PAYABLE

 

During the six months ended December 31, 2016, the Company had the following loan agreements outstanding, summarized as follows:

 

 

(a)

On Jan 1, 2016, the Company entered into a new financing arrangement to cover directors’ and officers’ liability insurance for the period December 31, 2015 to December 31, 2016. The amount financed was $73,176, which bears interest at 3.189% annually. Monthly payments of $8,131 are required to settle amounts owing. The balance outstanding as of December 31, 2016, was $nil (June 30, 2016 - $32,522).

 

As of December 31, 2016, $nil (June 30, 2016 – $45,609), representing the unamortized portion of prepaid insurance related to this policy, is included in prepaid expenses on the consolidated balance sheet.

 

F-16

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 10LOANS PAYABLE (CONTINUED)

 

 

(b)

On January 1, 2016, the Company entered into a short-term loan agreement with an original maturity date of July 1, 2016, for $110,000. A one-time interest charge of 5% or $5,500 is due as of July 1, 2016. The loan was entered into to settle marketing fees payable. As of June 30, 2016, the loan balance on the consolidated balance sheet is $115,500.

 

On July 2, 2016, the maturity date of the loan was revised to include the following loan repayment dates:

 

 

(i)

$5,500 on July 5, 2016 (paid)

 

(ii)

$25,000 on July 18, 2016 (paid)

 

(iii)

$25,000 on July 29, 2016 (paid)

 

(iv)

$25,000 on August 8, 2016 (partially repaid); and

 

(v)

$35,000 on August 22, 2016

 

In the event of a default on the loan, the unpaid principal amount together with the interest shall immediately increase by 130% and the lender will have the right to convert the outstanding balance into shares of the Company’s common stock. The outstanding balance will have a variable conversion price equal to 65% of the market price. The market price is defined as the lowest trading price in the 15 days prior to the conversion date. The lender is limited to 4.99% of the issued and outstanding common stock at the time of conversion unless the market capitalization of the Company falls below $2,500,000, then the limit will increase to 9.99%.

 

On September 9, 2016, the lender agreed to waive its right to conversion of the loan until January 31, 2017. The Company is in the process of amending the terms of repayment. The Company expects to settle the debt with cash, as such, no consideration for the default conversion feature has been accounted for.

 

 

(c)

On September 2, 2016, the Company entered into a promissory note agreement and received a total of $80,000, net of $8,000 in fees. The $88,000 plus a one-time interest charge of 10% is due December 13, 2016. In the event of default (non-payment), the balance of the promissory note will increase by 140%.

 

On December 13, 2016, the maturity date of the promissory note was extended to January 30, 2017. As consideration for the extension, the Company agreed to issue 500,000 shares. The shares were measured at the fair value on the agreement date and as such, $55,000 was recognized as an obligation to issue shares and the value of debt. During the six months ended December 31, 2016, $20,625 of the fair value of the share obligation was amortized and recognized in interest expense.

 

On January 29, 2017, the maturity date of the promissory note was extended to March 2, 2017. As consideration for the extension, the Company agreed to issue 600,000 shares.

 

 

(d)

On October 24, 2016, the Company entered into a promissory note agreement and received a total of $12,000. The note is Due November 9, 2016. In addition, the Company issued 75,000 common shares within 14 days of the start of the note. In the event of default (non-payment), the balance of the promissory note will increase by 140%. These shares were measured at the agreement date fair value with $10,500 recognized as interest expense and additional paid in capital.

 

On November 29, 2016, the maturity date of the promissory note was extended to January 30, 2017. As consideration for the extension, the Company agreed to issue 225,000 shares. The shares were measured at the fair value on the agreement date and as such, $27,000 was recognized as an obligation to issue shares and the value of debt. During the six months ended December 31, 2016, $13,935 of the fair value of the share obligation was amortized and recognized in interest expense. The Company is in the process of amending the terms of repayment.

 

 

F-17

 

 

Integral Technologies, Inc.

Notes to the Consolidated Financial Statements

 

NOTE 11 - DEFERRED REVENUE

 

On June 21, 2013, the Company signed a ten-year license agreement with Hanwha Advanced Materials Co., Ltd, of South Korea. The agreement grants Hanwha exclusive rights to sell, distribute and manufacture Integral's patented line of conductive plastics, ElectriPlast, in South Korea, as well as non-exclusive sales and distribution rights to ElectriPlast for Japan, Taiwan and the China markets.

 

The agreement called for license fees as follows:

 

 

$250,000 (received) to be paid to the Company within 15 business days; and

 

$250,000 (received) payment to be paid to the Company no later than one year after signing the agreement.

 

The payments have been recorded as deferred revenue, which will be recognized as license fee revenue in the consolidated statements of operations over the life of the ten-year contract. During the three months ended December 31, 2016, $25,000 (2015 - $25,000) has been recognized as revenue.

 

As of December 31, 2016 and June 30, 2016, the remaining deferred revenue was as follows:

 

   

December 31, 2016

   

June 30, 2016

 
                 

Current

  $ 50,000     $ 50,000  

Non-current

    295,833       320,833  
                 
    $ 345,833     $ 370,833  

 

 

NOTE 12 - SUBSEQUENT EVENTS

 

During January 2017, the Company completed a private placement amounting to $23,800 for the issuance of 340,000 units. Each unit consisted of one common share at $0.07 per share and one quarter share purchase warrant at $0.001 per warrant to purchase 85,000 common shares on or before October 1, 2017 at an exercise price of $0.20 per warrant. As of December 31, 2016, $14,000 had been received and recorded as share subscriptions and obligations to issue shares.

 

F-18

 

 

 

 

ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS AND PLAN OF OPERATIONS

 

Forward Looking Statements

 

This quarterly report on Form 10-Q and other reports (collectively, the “Filings”) filed by Integral Technologies, Inc. (“Integral” or the “Company”) from time to time with the U.S. Securities and Exchange Commission (the “SEC”) contain or may contain forward-looking statements and information that are based upon beliefs of, and information currently available to, the Company’s management as well as estimates and assumptions made by Company’s management. Readers are cautioned not to place undue reliance on these forward-looking statements, which are only predictions and speak only as of the date hereof. When used in the Filings, the words “anticipate,” “believe,” “estimate,” “expect,” “future,” “intend,” “plan,” or the negative of these terms and similar expressions as they relate to the Company or the Company’s management identify forward-looking statements. Statements contained herein that are not historical facts are forward-looking statements. Although the Company believes that the expectations reflected in the forward-looking statements are reasonable, the Company cannot guarantee future results, levels of activity, performance, or achievements. We caution investors that any forward-looking statements made by us are not guarantees of future performance and that actual results may differ materially from those in the forward-looking statements. Such risks and uncertainties include, without limitation: well-established competitors who have substantially greater financial resources and longer operating histories, regulatory delays or denials, our ability to compete in a highly competitive market, our access to sources of capital, and other risks and uncertainties described in our annual report on Form 10-K for the fiscal year ended June 30, 2016 as filed with the Securities and Exchange Commission on January 17, 2017, and available at www.sec.gov. Should one or more of these risks or uncertainties materialize, or should the underlying assumptions prove incorrect, actual results may differ significantly from those anticipated, believed, estimated, expected, intended, or planned.

 

This discussion and analysis should be read in conjunction with our consolidated financial statements and notes thereto included elsewhere in this Form 10-Q. Except for the historical information contained herein, the discussion in this Form 10-Q contains certain forward-looking statements that involve risks and uncertainties, such as statements of our plans, objectives, expectations and intentions. The cautionary statements made in this Form 10-Q should be read as being applicable to all related forward-looking statements wherever they appear in this Form 10-Q. Our actual results could differ materially from those discussed here. We undertake no obligation to update these forward-looking statements to reflect events or circumstances occurring after the date of this Form 10-Q, except as required by law.

 

Overview

 

Integral focuses the majority of its resources on researching, developing and commercializing its ElectriPlast® technologies. The technology possesses a multitude of applications in a myriad of industries. These include the auto industry, the aerospace, consumer electronics, and commercial aviation industries, among others. One key factor that could drive demand for ElectriPlast is the need for light-weighting. Automotive and aerospace are leading the way to achieve reduced emissions and increased fuel economy. Light-weighting involves the substitution of lighter materials, often times using carbon-fiber based, for heavier (aluminum and other metals) materials.

 

In addition, Integral allocates resources to expand and protect the extensive intellectual property holdings surrounding its ElectriPlast® technology. Integral’s business strategy focuses on the leveraging of its intellectual property rights and our strength in product design and material innovation. Integral is focusing its business development and marketing efforts on securing licensing and/or joint development agreements in areas for which it currently hold patents covering specific materials, components, parts, applications or end-products incorporating conductive resins and ElectriPlast technology. Integral collaborates with suppliers, Tier1 vendors, OEM's and manufacturers of products who would benefit from the incorporation of any of the ElectriPlast® applications.

 

ElectriPlast® is an innovative, electrically and thermally conductive resin-based material. The ElectriPlast® polymer is a compounded formulation of resin-based materials, which are conductively loaded, or doped, with a proprietary-controlled, balanced concentration of micron conductive materials, then pelletized. The conductive loading or doping within this pellet is then homogenized using conventional molding techniques and conventional molding equipment. The end result is a product that can be molded into any of the infinite shapes and sizes associated with plastics and rubbers, is non-corrosive, and can serve as an electrically conductive alternative

 

Various examples of applications for ElectriPlast® where Integral holds patent protection are: batteries, antennas, electronics shielding, lighting/LED circuitry, motors, switch actuators, resistors, medical devices, thermal management, toys and cable connector bodies, among others. We have been working to introduce these new applications and the ElectriPlast® technology on a global scale.

 

During the year ended June 30, 2016, several steps were taken by the Company to mature certain client relationships and applications while also addressing on-going funding requirements. The Company signed a global Reseller and Marketing Agreement with a leading nickel-plating carbon fiber manufacturer dated March 1, 2016. The agreement provides exclusivity for certain major customer(s) with a provision for expanding the exclusivity rights to the Company. Nickel-plated carbon fiber is a key conductive material in the making of ElectriPlast® and the Company will pursue other opportunities that strengthens its relationship with key suppliers. Earlier in 2015, the Company filed non-provisional patents associated with its bipolar battery technology and bipolar plate products. The Company believes the bipolar battery plate and associated power storage technology provides long-sought breakout weight savings and performance benefits for the lead-acid battery market. The company intends to develop the power storage technology as an Integral Technologies business unit and will seek partners to fully develop batteries for consumer and industrial consumption. The first prototype battery utilizing the ElectriPlast bipolar technology was produced in 2015. The battery was produced by Advanced Battery Concepts. Based on the initial prototype and a series of discussion during the quarter, the Company announced on April 26, 2016 a Joint Technology Assessment Program with Advanced Battery Concepts, an industry leader in large format bi-polar battery design and manufacture. Working under the JTAP, the parties produced a second, more advanced bipolar battery which it showcased at the 2016 North America Battery Show in Novi, Michigan and at the Company’s special shareholders meeting in Evansville, Indiana in November 2016.

 

1

 

 

During the quarter, the Company continued its efforts to expand its antistatic and static dissipative product line. The expansion of the product line addresses the needs of a much larger segment of the global conductive plastics market, including materials for electrostatic dissipation (ESD) and antistatic applications.  The new product line enables the Company to offer a more complete line of conductive plastics serving both the needs of lower conductive applications, while continuing to offer its more highly conductive line of plastics, all part of the ElectriPlast® family of conductive plastics. The Company believes the antistatic and static dissipative line holds significant revenue potential. The Company is currently fulfilling commercial orders to multiple customers with its new product line.

 

Companies continue to incorporate ElectriPlast in their on-going product development evaluations. On March 30, 2016, the Company announced that LeddarTech includes ElectriPlast material to produce lens barrels in its latest release of its LeddarOne Sensing Module, a compact and low-cost lidar that provides valuable presence detection and distance measurement capabilities to a wide range of finished products. In the announcement, LeddarTech highlighted the superior qualities of ElectriPlast in the key areas of weight-reduction, cost, and robustness in the demanding environment of drone aircraft.

 

In Asia, the Company, through its newly signed reseller agreement, provided conductive material containing nickel-plated carbon fiber material to Hanwha for prototype development for a major auto manufacturer based in Asia that is developing six (6) new applications. The Company continues to support Chang Rim Eng Inc. (“Chang Rim”) as it readies to commercialize ElectriPlast® in South Korea. The Company announced on October 8, 2014 that Chang Rim had successfully completed its prototype phase for a motor casing targeting the domestic Asia automotive market. On August 20, 2015, the Company announced with Chang Rim the largest ElectriPlast order in the Company’s history.

 

The company continues to make progress in shielding in the electric vehicle market. During the year, the Company provided ElectriPlast material and applications support to a Tier 1 company for finalizing an application for an electric vehicle. The company has been approved as a supplier for the domestic Tier 1 for the purpose of supplying ElectriPlast for a specific electric vehicle platform expected to go into production in 2017. The company expects initial commercial orders to be produced in the second half of 2017. The Company completed its first order in December 2016. The Company has also received initial pre-production orders from this Tier 1 for a 2018 European Electric vehicle.

 

In January 2016, the Company and a Tier 1 partner reached a technical milestone when its wire shielding application currently under development obtained the highest shielding effectiveness to date. The Company believes the level of shielding effectiveness validates the commercial viability of the technology. The companies have completed subsequent trials and continue to work towards commercialization for an effective alternative in replacing the more-costly metal, braided shielding.

 

The Company entered into a term sheet dated April 19, 2015 with a conductive plastics compounder (the “Compounder”) for the purpose of acquiring all the assets of the Compounder, with the Compounder remaining a separate entity. The Compounder is a niche supplier with an international customer base. The Company’s strategic interest in the Compounder is its equipment and expertise in conductive material compounding, as well as its customer base. The term sheet contemplated that upon the closing, all sales and marketing would be performed by the Company, and the Compounder would become the sole manufacturer for the Company. In October 2015, the founder and majority shareholder of the Compounder died from an accident before the transaction could be completed. A Special Administrator has been assigned to the estate, but due to the complexity of the deceased’s estate, the final disposition of the Compounder is unclear. Subsequently, all manufacturing employees left the Compounder and its customers turned to other suppliers.

 

Funding remains a priority for the Company, and during the six months ended December 31, 2016, $526,333 was raised through a combination of debt and private placements, net of loan repayments.

 

Pursuant to a separation agreement with the previous CFO, the Company will issue 36,000 shares of common stock and settle all unpaid fees from July 1, 2016 to February 10, 2017 (effective date of resignation). The Company is currently in the process of negotiating a compensation settlement agreement.

 

2

 

 

Patents/Trademarks on Technologies

 

Our intellectual property portfolio consists of over fourteen years of accumulated research and design knowledge and trade secrets.  We have sought United States (“US”) patent protection for many of our ideas related to our ElectriPlast® technologies.  Currently, we have filed 117 non-provisional US patent applications, 55 of which have been issued as patents, with 51 of those issued patents not yet expired.  No assurances can be given that all patent applications will be approved; however, to the extent that patents are not granted, we will continue to attempt to commercialize these technologies without the protection of patents.  As patents are issued, we will have the exclusive right to use and license the design(s) described in each issued patent for the life of the patent in the US.

 

Of the 117 non-provisional applications filed that have not issued as patents, 9 are currently pending, and 53 are no longer pending.  Integral continues to pursue intellectual property protection through its patent and trademark portfolio while constantly evaluating its filings to judiciously apply resources to our most critical technologies.  Integral has filed 12 Canadian patent applications, 2 of which have issued, with 10 no longer being active.  Integral has filed an International patent application, which published on September 25, 2014, claiming features of the Company’s capsule.  Subsequent to the year end the Company filed national stage applications based on this PCT on September 15, 2015 in Canada, Mexico, Brazil, China, Japan, South Korea, Europe, Malaysia, Saudi Arabia, India, Thailand, Philippines, Singapore and Australia. On August 10, 2015, the Company also filed new US and PCT patent applications for a Bipolar Plate and Method of Making and Using Same   with a US publication date of November 3, 2016 and a PCT publication date of November 10, 2016.

 

Integral has a registered US trademark for ELECTRIPLAST®, a registered US trademark for INTEGRAL (with design)®, and a registered US trademark application for WHERE LIGHTWEIGHTING STARTSTM.  In addition, Integral has a registered mark for ELECTRIPLAST® in China, Japan, Korea, Europe and Taiwan.  In addition, Integral has a registered mark for WHERE LIGHTWEIGHTING STARTS® in Europe, Japan and Korea.  These applications and registrations establish rights for the use of these marks in commerce.

 

Financial Condition

 

The Company has not generated significant revenue since inception. Although the Company has begun to receive some revenue from the sale of material for commercial applications, the Company is devoting substantially all its efforts to developing the business. From inception on February 12, 1996 through June 30, 2016, we have accrued an accumulated deficit of approximately $59 million.

 

As of December 31, 2016, our assets were $218,988, consisting of cash of $43,615, accounts receivable of $33,154, prepaid expense of $63,762, deposit of $2,500 and property and equipment of $75,957.

 

As of December 31, 2016, current liabilities of $2,743,358 consisting of accounts payable and accruals of $1,687,690, related party payables of $127,500, a loan payable of $98,560, deferred revenues of $50,000, convertible debentures of $686,408, derivative liabilities of $44,000 and warrant liability of $49,200. Non-current liabilities consist of deferred revenues of $295,833.

 

As of December 31, 2016, total stockholders' deficit was $2,820,203.

 

Results of Operations of the Six Months Ended December 31, 2016, Compared to the Six Months Ended December 31, 2015

 

Our net loss for the six months ended December 31, 2016, was $1,461,952 compared to a net loss of $2,075,800 for the six months ended December 31, 2015, representing a decrease of $613,848. Significant changes for the six months ended December 31, 2016, compared to the corresponding period of the prior period have been described as follows:

 

 

Total revenues increased by $8,643 to $51,086 for the six months ended December 31, 2016. The increase is a result of new services revenue stream related to the antistatic and dissipative products which has generated $20,249 in new revenues, which is offset by a slight decrease in sales of the higher conductive line of ElectriPlast of $11,606.

 

Operating expense for the six months ended December 31, 2016, were $1,450,659 compared to operating expense of $1,855,957 for the six months ended December 31, 2015, representing a decrease of $405,298. Significant changes for the six months ended December 31, 2016, compared to the corresponding period of the prior fiscal year have been described as follows:

 

 

Consulting fees decreased by $200,342 to $302,283 for the six months ended December 31, 2016. Consulting fees include non-cash share obligations for the six months ended December 31, 2016 of $4,320 compared to non-cash shares issued for services of $18,060 for the six months ended December 31, 2015. The decrease is due to implementing cost saving strategies and reduction in use of external consultants. As described in the notes to the financial statements, the fair value of the share obligations were measured in reference to their market value on the date each series of shares became issuable;

 

Research and development costs decreased by $94,335 to $250,914 for the six months ended December 31, 2016. The decrease is due to the Company’s focus on further developing nascent revenue streams and from reduced research and development requirements for the quarter.

 

3

 

 

Significant changes for other income and expenses for the six months ended December 31, 2016, compared to the six months ended December 31, 2015, have been described as follows:

 

 

Fair value gain on derivative financial liabilities for the six months ended December 31, 2016 was $34,138 compared to a loss of $39,499 for the six months ended December 31, 2015. During the six months ending December 31, 2016, the Company primarily used equity financing to fund operations; whereas, in the corresponding period of the prior fiscal year, the Company primarily funded operations through debt. Further, the reduction drop in the share price has resulted in a drop in the fair value of debt resulting in a gain on the decrease in the derivative liability obligation. As described in the notes to the financial statements, the fair value loss on derivative financial liabilities is non-cash fair value measurement calculated using the Black-Sholes option pricing model and a binomial lattice model where appropriate.

 

Fair value gain on warrant liability for the six months ended December 31, 2016 was $38,300 compared to $nil for the six months ended December 31, 2015. During the six months ending December 31, 2016, the Company had warrants outstanding giving rise to a liability due to the nature of the conversion features of the warrant; whereas there were no such warrants outstanding during the six months ended December 31, 2015. The gain in the warrant liability is due to a reduction in the share price resulting in a corresponding drop in the fair value of debt. As described in the notes to the financial statements, the fair value loss on derivative financial liabilities is non-cash fair value measurement calculated using the Monte Carlo method.

 

Loss on extinguishment of convertible debenture was $33,906 compared to a gain of $1,927 for the six months ended June 30, 2015. During the six months ended December 31, 2016, the Company issued shares with a lower market value resulting in a loss on extinguishment. In the prior year, the Company transferred its convertible debt to a new lender with more favorable terms resulting in an extinguishment gain of $1,927 for accounting purposes.

 

Interest expense decreased by $123,877 for the six months ended December 31, 2016, due to the decrease in convertible debt transactions. Included in interest expense is the amortization of the convertible debt discount of $37,167 (2015 - $204,304). Remaining change in interest expense is due to decrease in the amount of loans outstanding at the end of the period.

 

 

Results of Operations of the Three Months Ended December 31, 2016 compared to the Three Months Ended December 31, 2015

 

Our net loss for the three months ended December 31, 2016, was $731,177 compared to a net loss of $993,415 for the three months ended December 31, 2015, representing a decrease of $262,238. Significant changes for the three months ended December 31, 2016, compared to the corresponding period of the prior period have been described as follows:

 

 

Total revenues decreased by $1,902 to $27,841 for the three months ended December 31, 2016. The increase is primarily a result of a decrease of $11,406 in sales of the higher conductive line of ElectriPlast products which has been offset by $9,504 generated from services revenue associated with the antistatic and static dissipative line.

 

Operating expense for the three months ended December 31, 2016, were $664,391 compared to operating expense of $876,507 for the three months ended December 31, 2015, representing a decrease of $212,116. Significant changes for the three months ended December 31, 2016, compared to the corresponding period of the prior fiscal year have been described as follows:

 

 

Consulting fees decreased by $112,488 to $146,503 for the three months ended December 31, 2016. Consulting fees include non-cash share obligations for the three months ended December 31, 2016 of $8,340 compared to non-cash shares issued for services of $9,240 for the three months ended December 31, 2015. The decrease is due to implementing cost saving strategies and reduction in use of external consultants. As described in the notes to the financial statements, the fair value of the share obligations were measured in reference to their market value on the date each series of shares became issuable;

 

Research and development costs decreased by $41,177 to $121,075 for the three months ended December 31, 2016. The decrease is due to the Company’s focus on further developing nascent revenue streams and from reduced research and development requirements for the quarter.

 

Significant changes for other income and expenses for the three months ended December 31, 2016, compared to the three months ended December 31, 2015, have been described as follows:

 

 

Fair value gain on derivative financial liabilities for the three months ended December 31, 2016 was $4,900 compared to a gain of $17,351 for the three months ended December 31, 2015. During the three months ending December 31, 2016, the Company primarily used equity financing to fund operations; whereas, in the corresponding period of the prior fiscal year, the Company primarily funded operations through debt. As described in the notes to the financial statements, the fair value loss on derivative financial liabilities is non-cash fair value measurement calculated using the Black-Sholes option pricing model and a binomial lattice model where appropriate.

 

Fair value gain on warrant liability for the three months ended December 31, 2016 was $5,500 compared to $nil for the three months ended December 31, 2015. During the three months ending December 31, 2016, the Company had warrants outstanding giving rise to a liability due to the nature of the conversion features of the warrant; whereas there were no such warrants outstanding during the three months ended December 31, 2015. The gain in the warrant liability is due to a reduction in the share price resulting in a corresponding drop in the fair value of debt. As described in the notes to the financial statements, the fair value loss on derivative financial liabilities is non-cash fair value measurement calculated using the Monte Carlo method.

 

4

 

 

 

Loss on extinguishment of convertible debenture was $33,906 (three months ended December 31, 2015 - $nil). During the three months ended December 31, 2016, the Company recognized a loss on the difference between the market value of shares issued to settle debt. There were no such extinguishments for the comparative period.

 

Interest expense decreased by $92,941 for the three months ended December 31, 2016, due to the decrease in convertible debt transactions. Included in interest expense is the non-cash amortization of the convertible debt discount of $37,167 (2015 - $152,935). Remaining change in interest expense is due to an increase in the amount of loans and cost of debt outstanding at the end of the period.

 

Critical Accounting Policies and Estimates

 

Revenue recognition

 

The Company recognizes revenues from a contract with a plastics technology company for which it provides services and products, on a net basis. Fees are recognized monthly as services and products are provided. This is the point that revenues are considered realizable and earned.

 

The Company signed a ten-year license agreement with Hanwha Advanced Materials Co., Ltd., (“Hanwa”), of South Korea. For license agreements that the Company enters into, revenue is recognized when all four of the following criteria are met: (i) a contract is executed, (ii) the contract price is fixed and determinable, (iii) delivery of the service or products has occurred, and (iv) collectability of the contract amounts is reasonably assured.

 

The Company’s license agreements can provide for upfront license fees, maintenance payments, and/or substantive milestone payments. In accordance with revenue recognition guidance, the Company identifies all of the deliverables at the inception of the agreement. License fees, which are nonrefundable fees, will be evaluated for standalone value to the licensor and may be recognized upon delivery pursuant to terms of the agreement. Upfront nonrefundable fees associated with license and development agreements where the Company has continuing involvement that does not meet the requirement of a separate deliverable are recorded as deferred revenue and recognized over the estimated service period. The Company may also enter into agreements to provide engineering services. The Company recognizes revenue from engineering services as the service has been performed and amounts are probable of collection.

 

There have been no material changes to our critical accounting policies as described in Item 9 of our most recent annual report on Form 10-K for the year ended June 30, 2016, as filed with the Securities and Exchange Commission on January17, 2017.

 

Management does not believe that any new accounting pronouncements not yet effective will have any material effect on the Company’s consolidated financial statements if adopted.

 

Liquidity and Capital Resources

 

As of December 31, 2016, we had $43,615 in cash on hand, and we estimate that we will continue to require $3 million annually of additional financing to fund our ongoing operating and capital expenditures in order to carry out our business plan and to continue to operate during our fiscal year ending June 30, 2017. The Company has historically funded this requirement through a combination of debt and equity proceeds. Until such time as the Company launches material product-based manufacturing operations, we believe our funding need will remain approximately $3 million annually, and we will disclose promptly any changes to that estimate.

 

Based on our current cash and cash equivalents levels and expected cash flow from operations, we believe our current cash position is not sufficient to fund our cash requirements during the next twelve months, including operations and capital expenditures. We intend to license our proprietary technology and services or obtain equity and/or debt financing to support our current and proposed operations and capital expenditures. There can be no assurance, however, that any such opportunities may arise, or that any such acquisitions may be consummated. Additional financing may not be available on satisfactory terms when required. In addition, the trading price of our common stock and a downturn in the equity and debt markets could make it more difficult to obtain financing through the issuance of equity or debt securities. To the extent that we raise additional funds by issuing equity securities, our stockholders may experience significant dilution. We currently have no firm commitments for any additional capital. There is no guarantee that we will be successful in raising the funds required. If additional financing is not available or is not available on acceptable terms, we will have to curtail our operations.

 

The Company’s cash usage since inception in 1996 has been funded primarily from proceeds from the issuance of common stock. The company has issued warrants which have the potential to yield $1,321,767 calculated as 3,905,889 warrants exercisable at $0.30 per share and 750,000 warrants exercisable at $0.20 per share. In the event the stock price rises to certain levels in the future and that some or all of the warrant holders elect to acquire Common Stock shares by exercising their warrants, prior to the expiry date, the Company may raise additional funds from warrant holders. We have no ability to forecast future stock price movements nor are we able to determine how many warrant holder would elect to acquire shares by exercising their warrants. Subsequent to year end the company has raised $9,800 through equity financing.

 

We are currently in limited manufacturing operations. As demand continues to grow and our need to increase capacity, reduce manufacturing costs and to improve margins, we would consider directly entering into the manufacturing business, including the possibility of acquiring existing assets or an operating company to help us accelerate this process, however this will only be possible through additional capital.

 

5

 

 

Off-Balance Sheet Arrangements

 

We had no off-balance sheet arrangements as of December 31, 2016.

 

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

 

As a “smaller reporting company,” as defined in Rule 12b-2 of the Exchange Act, we are not required to provide the information called for by this Item.

 

 

ITEM 4. CONTROLS AND PROCEDURES

 

Disclosure Controls and Procedures

 

As at December 31, 2016, the Company carried out an evaluation, under the supervision and with the participation of management, including the Chief Executive Officer and the Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) or 15d-15(e) of the Exchange Act). Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that, as of the Evaluation Date, our disclosure controls and procedures were ineffective to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is (1) recorded, processed, summarized and reported within the time periods specified in applicable rules and forms, and (2) accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, to allow timely decisions regarding required disclosure.

 

Management’s Report on Internal Control Over Financial Reporting

 

The Company’s management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rule 13a-15(f) of the Exchange Act. These rules refer to the controls and other procedures of a company that are designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Internal control over financial reporting includes these policies and procedures that (1) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of our assets that could have a material effect on the financial statements.

 

Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting as of the end of the period covered by this report. Our evaluation was based on the criteria for smaller public companies set forth in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO 2013). Based on our evaluation under those criteria, our management concluded that, as of December 31, 2016, our internal control over financial reporting is ineffective due to the material weakness described below.

 

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis. The primary factor contributing to the material weakness, which relates to our financial statement close process, was as follows:

 

 

From time to time we experience delays in receiving, reviewing and accounting for complex transactions including financings.  As a result of these delays, we were not able to file our 10-Q timely, which is evidence that we have a material weakness in internal controls.

 

While management believes that the Company’s financial statements previously filed in the Company’s SEC reports have been properly recorded and disclosed in accordance with US GAAP, based on the material weakness identified above, we have already implemented, the specific remediation initiative described below:

 

 

Management contracted the services of a third-party firm to create and conduct the required sophisticated analysis for the complex transactions impacting the June 30, 2016 10-K, and may continue to use their services for quarterly reporting as required.

 

Management believes the action described above will remediate the material weakness we have identified and strengthen our internal control over financial reporting.

 

6

 

 

This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by the Company’s registered public accounting firm pursuant to the exemption provided to issuers that are neither “large accelerated filers” nor “accelerated filers” under the Dodd-Frank Wall Street Reform and Consumer Protection Act.

 

Limitations on the Effectiveness of Internal Controls

 

There are inherent limitations to the effectiveness of any system of internal control over financial reporting, such as resource constraints, judgments used in decision-making, assumptions about the likelihood of future events, the possibility of human error and the risk of fraud. Accordingly, even an effective system of internal control over financial reporting can provide only reasonable assurance with respect to the preparation and presentation of financial statements in accordance with accounting principles generally accepted in the United States. Moreover, projections of any evaluation of effectiveness in future periods are subject to the risk that controls may be inadequate because of changes in conditions, or that the degree of compliance with policies or procedures may deteriorate over time. Our management, including our chief executive officer and chief financial officer, do not expect that our disclosure controls and procedures or our internal control over financial reporting are or will be capable of preventing or detecting all errors or fraud.

 

 

 

PART II

 

OTHER INFORMATION COMPANY CONFIRM OR UPDATE AS NEEDED

 

ITEM 1 - LEGAL PROCEEDINGS

 

From time to time, we may become involved in various lawsuits and legal proceedings, which arise in the ordinary course of business. However, litigation is subject to inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm business. We are currently not aware of any such legal proceedings or claims that will have, individually or in the aggregate, a material adverse affect on business, financial condition or operating results.

 

ITEM 1A. RISK FACTORS

 

The Company is a smaller reporting Company as defined by Rule 12b-2 of the Exchange Act and is not required to provide information required under this Item.

 

ITEM 2 - UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

 

The securities sold were not registered under the Securities Act, or the securities laws of any state, and were offered and sold in reliance on the exemption from registration afforded by Section 4(a)(2) and Regulation D (Rule 506) under the Securities Act and corresponding provisions of state securities laws, which exempt transactions by an issuer not involving any public offering. Each investor is an "accredited investor" as such term is defined in Regulation D promulgated under the Securities Act.  

 

ITEM 3 - DEFAULTS UPON SENIOR SECURITIES

 

None.

 

ITEM 4 - MINE SAFETY DISCLOSURES

 

Not Applicable.

 

 

7

 

 

ITEM 5 - OTHER INFORMATION

 

On October 12, 2016, the Board of Directors of Integral Technologies, Inc. (the “Company”) approved and recommended for stockholder approval an amendment to the Company’s Articles of Incorporation to increase the number of authorized shares of common stock to 250,000,000 from 150,000,000 (the “Charter Amendment”). On November 28, 2016, the Company’s stockholders approved the Charter Amendment. The final voting results at the Company’s special meeting of stockholders with respect to the Charter Amendment were 70,311,541shares voted for, 8,343,794 shares voted against and 167,670 shares abstaining. The Charter Amendment was filed with the Nevada Secretary of State and became effective on November 28, 2016. A copy of the Charter Amendment is attached to this Current Report as Exhibit 3.1 and is incorporated by reference herein.

 

On November 28, 2016, at the Company’s special meeting of stockholders, the Company’s stockholders approved the Charter Amendment described in Item 5.03 above.

 

As of the record date for the meeting of October 24, 2016, 137,413,603 shares of common stock, constituting all of the outstanding capital stock of the Company, were issued and outstanding, of which a total of 78,823,005 shares were voted at the special meeting.

 

ITEM 6. Exhibits

 

     
     

31.1

 

Certification by Chief Executive Officer, required by Rule 13a-14(a) or Rule 15d-14(a) of the Exchange Act is filed herewith.

 

 

 

31.2

 

Certification by Chief Financial Officer, required by Rule 13a-14(a) or Rule 15d-14(a) of the Exchange Act is filed herewith.

 

 

 

32.1

 

Certification by Chief Executive Officer, required by Rule 13a-14(b) or Rule 15d-14(b) of the Exchange Act and Section 1350 of Chapter 63 of Title 18 of the United States Code is filed herewith.

 

 

 

32.2

 

Certification by Chief Financial Officer, required by Rule 13a-14(b) or Rule 15d-14(b) of the Exchange Act and Section 1350 of Chapter 63 of Title 18 of the United States Code is filed herewith.

 

 

 

     

 

EX-101.INS

 

XBRL Instance Document

 

 

 

EX-101.SCH

 

XBRL Taxonomy Extension Schema Document

 

 

 

EX-101.CAL

 

XBRL Taxonomy Extension Calculation Linkbase Document

 

 

 

EX-101.DEF

 

XBRL Taxonomy Extension Definition Linkbase Document

 

 

 

EX-101.LAB

 

XBRL Taxonomy Extension Labels Linkbase Document

 

 

 

EX-101.PRE

 

XBRL Taxonomy Extension Presentation Linkbase Document

 

8

 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

 

Integral Technologies, Inc.

 

 

 

 

 

 

 

 

 

 

By:

/s/ Douglas Bathauer

 

 

 

Douglas Bathauer, Chief Executive Officer

 

 

 

(Principal Executive Office)

 

 

 

By:

/s/ Eli Dusenbury

 

 

 

Eli Dusenbury, Chief Financial Officer

 

 

 

(Principal Financial and Accounting Officer)

 

 

Date: February 17, 2017

 

9

 

 

EXHIBIT INDEX

     

31.1

 

Certification by Chief Executive Officer, required by Rule 13a-14(a) or Rule 15d-14(a) of the Exchange Act is filed herewith.

 

 

 

31.2

 

Certification by Chief Financial Officer, required by Rule 13a-14(a) or Rule 15d-14(a) of the Exchange Act is filed herewith.

 

 

 

32.1

 

Certification by Chief Executive Officer, required by Rule 13a-14(b) or Rule 15d-14(b) of the Exchange Act and Section 1350 of Chapter 63 of Title 18 of the United States Code is filed herewith.

 

 

 

32.2

 

Certification by Chief Financial Officer, required by Rule 13a-14(b) or Rule 15d-14(b) of the Exchange Act and Section 1350 of Chapter 63 of Title 18 of the United States Code is filed herewith.

EX-101.INS

 

XBRL Instance Document

 

 

 

EX-101.SCH

 

XBRL Taxonomy Extension Schema Document

 

 

 

EX-101.CAL

 

XBRL Taxonomy Extension Calculation Linkbase Document

 

 

 

EX-101.DEF

 

XBRL Taxonomy Extension Definition Linkbase Document

 

 

 

EX-101.LAB

 

XBRL Taxonomy Extension Labels Linkbase Document

 

 

 

EX-101.PRE

 

XBRL Taxonomy Extension Presentation Linkbase  Document

 

 

10